Process Engineering |
Engineering Specialties
Mechanical Engineering |
Civil Engineering Works |
Piping Engineering |
Electrical Engineering |
Instrumentation Engineering |
Safety Engineering |
On Site Management & Project Supervision |
Process Engineering
SmartPlant PID Software.
Design of specific processess.
Process simulation.
Optimization of production processes: effective utilities consumption, identifying and debottlenecking, etc.
Studies and revamping of existing units.
Study of technical and economic feasibility of process modifications.
Process Flow Diagrams (PFD's).
Piping and Instrumentation Diagrams (P&ID's).
Lists and Data Sheets of equipment.
Design and specification of equipment, vessels and storage tanks.
Specifying dynamic equipment.
Sizing and specification of control valves and safety valves.
Preparation of operating manuals.
CONTACT
Mª Dolores Valverde Sánchez
Jefa de Área de Ingeniería de ProcesosMechanical Engineering
Process Equipment:
o Mechanical Design of Pressure Vessels and Exchangers: PVElite Software.
o Mechanical Design of Tanks: Software: TANK.
o Specification of dynamic equipment: pumps, compressors, agitators, etc.
o Support structures and foundations.
o Dimensional control via Point Cloud. Software: 3DReshaper.
Calculation of Structures:
o Design Software: Tekla, TRICALC, CYPE and SAP2000.
o Process buildings
o Industrial buildings.
o Singular or Service buildings.
o Building foundations.
CONTACT
Andrés Almodóvar Melendo
Jefe de Área Ingeniería Mecánica y Obra Civil. División IngenieríaCivil Engineering Works
Foundations:
o Foundations of buildings and equipment.
o Earth works.
o Buried networks.
o Layout of equipment and facilities.
o Internal Circulation analysis.
o Emergency and storm water pools.
Industrial Urbanisation Projects:
o Access roads and traffic analysis.
o Roadways and Sewerage Networks.
o Utilities: Electricity, water, etc.
o Lighting and signalling.
o Landscaping and gardening.
CONTACT
Andrés Almodóvar Melendo
Jefe de Área Ingeniería Mecánica y Obra Civil. División IngenieríaPiping Engineering
3D Design Platform: SmartPlant 3D and SmartPlant Isometrics and PDMS.
Generation of Piping Class Specifications.
Routing of pipes.
Isometric Drawing, exportable to PDS, PDMS and AUTOPLANT platforms.
Bill of Materials by diameter and isometric measurement.
Laser Scanner and modelling of existing plants (Point Cloud). Software: Cyclone and CloudWorx.
Flexibility Analysis and Stress Calculations. Software: CAESAR II.
Calculation of supports and beams / sleepers.
CONTACT
Miguel Ángel Pérez Ceballos
Jefe de Área Ingeniería de Tuberías. División IngenieríaElectrical Engineering
Power Generation Projects.
High Voltage Power Lines.
Substations and Transformer.
Low Voltage Distribution Networks.
Indoor Low Voltage Facilities.
Motor Control Centers (MCCs).
Power supply in High and Low Voltage.
Special installations: Dust, Corrosion, etc..
Lighting Studies and Lighting Design.
Specifications of motors, transformers, rectifiers, inverters, UPS's, and other electrical equipment.
Earthing / Grounding and Lightning Protection.
Classification of areas with fire and explosion risks.ATEX Studies.
CONTACT
Ángel Janeiro Blanco
Jefe de Área Ingeniería Eléctrica y de Instrumentación. División IngenieríaInstrumentation Engineering
Detailed Engineering of Instrumentation.
Selection and specification of instruments and valves.
Specifying instrument installation.
Wiring diagrams.
Definition and Design of Control Loops.
Definition and Design of Interlocks.
Technical Specification of Instruments.
Systems Control and Data Acquisition.
Software: Own or INTOOLS (SmartPlant Instrumentation).
CONTACT
Ángel Janeiro Blanco
Jefe de Área Ingeniería Eléctrica y de Instrumentación. División IngenieríaSafety Engineering
Basic design and detail:
o Safety Valves.
o Flare systems.
o Flare Headers.
o Knockout Drums.
o Others Effluent Disposal Systems.
Layout Studies of implementation and logistics of internal movements.
Classification of areas and ATEX legislation.
CONTACT
José Luis Bayort Raposo
Jefe del Dpto. de Ingeniería de ProyectosOn Site Management and Project Supervision
Legal and Operative organisation of the work.
Verification of installation, structures, piping and equipment.
Planning and control of the construction.
Advice on Changes.
Approval of Bidders and Certification of work.
Inspection Points Program and Checklists.
Attendance in Testing Equipment.
Development of a Fault List.
Final acceptance of the work.
Legal Direction of Works (Dirección Facultativa), only if INERCO develops the detailed engineering.
CONTACT
